1. Home
  2. Services
  3. Expansion joint treatment

Expansion Joint Treatment

Heavy-duty polysulphide or PU sealant and elastomeric tape systems engineered to handle thermal building movement without tearing.

Access methodRope access / cradle
Execution timeProject-based, after audit
WarrantyUp to 10 years, written
Key specBacker rod + primer + UV-stable sealant
Warning signs

When does your building need this?

Expansion joints let a building move with heat and load. When the sealant in them hardens or tears, water pours in between towers, along corridors and into basements. We remove the failed material and install a joint system designed to move with the building.

  • Leaks along the line where two towers or blocks meet
  • Cracked, hardened or missing joint sealant
  • Damp walls next to a joint in corridors or flats
  • Water dripping in basements below joints
  • Joint covers that have lifted or broken
Root cause

Why it happens, and why the quick fix fails

Ordinary cement or rigid fillers cannot stretch. As the building expands and contracts every day, they crack away from the edges and open a direct path for water.

Typical quick fixFilling the joint with cement or putty
Sealspire methodBacker rod, primer and a movement-rated sealant or tape system
Standard operating procedure

Technical workflow

Every stage is logged with photos and shared with your RWA or estate manager.

  1. STEP 01

    Joint cleaning

    Old sealant and debris are cut out and the joint faces are cleaned back to sound concrete.

  2. STEP 02

    Backer rod and primer

    A closed-cell backer rod sets the right sealant depth and a primer improves adhesion.

  3. STEP 03

    Sealant application

    Heavy-duty polysulphide or PU sealant is applied and tooled to the correct profile.

  4. STEP 04

    Elastomeric tape

    Where needed, an elastomeric waterproofing tape bridges the joint for extra protection.

  5. STEP 05

    Water testing

    The joint is hose-tested before sign-off.

Specification

Approved material systems

Factory-sealed branded materials, with technical data sheets submitted before work starts. Final selection depends on the audit.

Application areaRecommended systemKey technical benefitApproved brands
Expansion jointsHeavy-duty polysulphide sealant±25% movement capacity, weatherproofFosroc Thioflex / SikaFlex
Wide or active jointsElastomeric joint tape systemBridges large movement and keeps water outApproved tape systems
FAQs

Common questions

How long does joint sealant last?

A correctly installed, movement-rated sealant lasts many years. The warranty for your job is stated in the proposal.

Do we need bamboo scaffolding for a 15 to 25 floor tower?

No. We use certified double-rope access systems and motorized suspended cradles. This avoids security risks, protects resident privacy, keeps ground parking open and cuts setup time significantly.

How do we verify that genuine branded chemicals are used?

All materials arrive in original, factory-sealed containers. Your RWA or facility representative can check batch numbers, seals and the manufacturer Technical Data Sheets (TDS) before anything is opened.

What does the written warranty cover?

Material adhesion, resistance to film cracking, and waterproofing performance against seepage in all treated areas, backed by a formal QA/QC sign-off sheet. The period depends on the system used and is stated in the proposal.

Not sure this is the right fix? Our free audit finds the cause first, then we recommend the system.

Book a free site audit
Free site audit

Need expansion joint treatment for your building?

Our team maps the moisture and cracks, finds the root cause and gives your committee a written BOQ before any work starts.