1. Home
  2. Services
  3. High-Rise Plumbing & Shaft Systems
MEP · Plumbing

High-rise plumbing, vertical shaft rehabilitation & leak-free piping systems.

From corroded GI risers and leaking drainage stacks to hydro-pneumatic pressure pumps, we carry out high-altitude plumbing repairs via rope access with minimal water shutdowns.

AccessRope access & shaft rigging
TestingHydrostatic pressure test
BrandsAstral, Ashirvad, Supreme, Grundfos
WarrantyWritten, scope-based
Warning signs

The high-rise plumbing problem

In high-rise societies and commercial towers, hidden leaks inside plumbing shafts are behind a large share of recurring seepage. Fixing the wall without fixing the pipe means the damp comes back.

  • Continuous dampness or dripping water along vertical bathroom or kitchen shafts
  • Sudden drop in water pressure on upper floors, or burst joints on lower floors (PRV failure)
  • Corroded, rusting GI overhead-tank supply lines and sagging SWR drainage stacks
  • Foul odour or sewage seepage in basement parking ceilings from cracked drainage headers
  • Repeated waterproofing failure caused by concealed pipe leaks behind tiles or shafts
Core plumbing services

Six specialised modules

Each one is scoped after the audit, so you pay only for what the building actually needs.

Module 01

Vertical shaft riser & stack replacement

Safe rope-access removal of corroded GI / CI stacks and installation of heavy-duty CPVC, UPVC and SWR pipes with MS / SS clamps.

Module 02

Concealed leak detection & repair

Non-destructive acoustic and thermal moisture tracing to pinpoint the exact pipe leak without breaking whole bathrooms or walls.

Module 03

PRVs & booster systems

Installation, calibration and servicing of pressure reducing valves, hydro-pneumatic booster pumps, and overhead / underground tank piping.

Module 04

Basement & ceiling drainage headers

Replacing leaking cast-iron or PVC suspended drainage lines in stilt and basement parking areas.

Module 05

Combined shaft plumbing + waterproofing

Fix the leaking pipes and waterproof the shaft plaster in one mobilization, so there is no blame game between plumber and waterproofer.

Module 06

STP / WTP pipeline & valve maintenance

Servicing gate valves, NRVs, float valves and main distribution headers for residential societies.

Standard operating procedure

Step-by-step technical workflow

Every stage is logged with photos and shared with your RWA or facility team.

  1. STEP 01

    Shaft inspection & pressure diagnosis

    Vertical stacks are inspected via rope access, static and dynamic water pressure is checked across floors, and active leak points are isolated.

  2. STEP 02

    Planned shutdown & material staging

    Short, pre-scheduled water shutdown windows are agreed with the RWA or estate manager so residents face minimal inconvenience.

  3. STEP 03

    Precision pipe installation & clamping

    Corroded lines are cut out and factory-fresh SDR-11 CPVC or Type-B SWR pipes go in, with expansion loops, rubber-lined clamps and proper joints.

  4. STEP 04

    Hydrostatic testing & handover

    New supply lines are pressurized to 1.5× working pressure and drainage stacks flow-tested to prove zero drops or leaks before shafts are closed.

Why it matters

Fix the system, not just the symptom

In high-rise societies and commercial towers, hidden leaks inside plumbing shafts are behind a large share of recurring seepage. Fixing the wall without fixing the pipe means the damp comes back.

  • Diagnosis report with photos before any work
  • Itemized BOQ with brand-wise technical data sheets
  • Planned shutdown windows agreed with your RWA
  • Signed test report at handover
Specification

Approved plumbing materials & systems

Genuine, branded materials with batch verification. Final selection depends on the audit.

ApplicationRecommended systemTechnical standardApproved brands
Hot & cold water risersCPVC SDR-11 / composite pipesHigh pressure and thermal stabilityAstral / Ashirvad / Supreme
Soil, waste & rainwater (SWR)Ring-fit / solvent-fit Type-B SWRLeak-proof rubber-ring joints, UV-stabilizedSupreme / Prince / Finolex
Valves & pressure controlBrass / SS ball valves, NRVs & PRVsPrevents lower-floor pipe burstsZoloto / Sant / Honeywell
Pumps & boostersMulti-stage hydro-pneumatic systemsConstant pressure across 20+ floorsGrundfos / Kirloskar / CRI
FAQs

Plumbing questions from RWAs

How long will water be shut off during riser replacement?

We pre-fabricate pipe assemblies and schedule phased 3 to 4 hour daytime shutdowns per tower stack, with 48 hours advance notice to residents.

Why do our society's lower floors get frequent tap and pipe leaks?

High static pressure from overhead tanks on 15 to 25 floor towers damages fixtures unless correctly calibrated pressure reducing valves (PRVs) are installed.

Can you fix the leaking shaft pipes and the damp shaft wall together?

Yes. Our combined shaft rehab package covers pipe replacement, core-cut sealing, plaster repair and elastomeric waterproofing in one coordinated schedule.

Do you need scaffolding inside narrow plumbing shafts?

No. Trained rope-access technicians work safely inside narrow shafts on dual-rope rigging, which saves the cost and time of scaffolding.

Do you offer AMCs for society plumbing?

Yes. We do one-time major shaft rehabilitation and scheduled preventive maintenance for RWAs and commercial buildings.

Free site audit

Tired of recurring bathroom shaft seepage? Book a combined plumbing + waterproofing site audit.

Our team maps the moisture and cracks, finds the root cause and gives your committee a written BOQ before any work starts.