1. Home
  2. Services
  3. PU injection waterproofing

PU Injection Waterproofing

Non-destructive high-pressure polyurethane (PU) injection grouting for bathrooms, shafts, terraces and basements.

Access methodRope access / cradle
Execution timeProject-based, after audit
WarrantyUp to 10 years, written
Key specUsually no tile breaking
Warning signs

When does your building need this?

Seepage from a bathroom above, a plumbing shaft or a terrace damages ceilings and grows fungus. The usual answer is to break all the tiles. In many cases that is not needed: high-pressure PU injection seals the water path inside the concrete itself.

  • Damp patches on a ceiling below a bathroom
  • Paint bubbling near shafts and ducts
  • White salt deposits on walls
  • Musty smell and fungus spots
  • Seepage that worsens after water use or rain
Root cause

Why it happens, and why the quick fix fails

Water travels through fine cracks, construction joints and gaps around pipes, often some distance from where the stain appears. That is why we trace the source with moisture meters before injecting.

Typical quick fixBreaking and relaying all tiles
Sealspire methodTargeted PU injection grouting
Standard operating procedure

Technical workflow

Every stage is logged with photos and shared with your RWA or estate manager.

  1. STEP 01

    Find the source

    Moisture mapping traces where water is entering.

  2. STEP 02

    Fix injection ports

    Small packers are fixed along the crack or joint line, usually without lifting tiles.

  3. STEP 03

    High-pressure injection

    PU resin is pumped in, reacts with moisture, expands and seals the crack network.

  4. STEP 04

    Seal and restore

    Ports are removed, holes sealed, and damaged finishes repaired once dry.

Specification

Approved material systems

Factory-sealed branded materials, with technical data sheets submitted before work starts. Final selection depends on the audit.

Application areaRecommended systemKey technical benefitApproved brands
Active seepageHydrophobic / hydrophilic PU groutExpands in contact with water to seal leaksApproved PU grout systems
FAQs

Common questions

Will you need to break my tiles?

For suitable seepage conditions, no. We confirm after inspection.

What does the written warranty cover?

Material adhesion, resistance to film cracking, and waterproofing performance against seepage in all treated areas, backed by a formal QA/QC sign-off sheet. The period depends on the system used and is stated in the proposal.

Not sure this is the right fix? Our free audit finds the cause first, then we recommend the system.

Book a free site audit
Free site audit

Need pu injection waterproofing for your building?

Our team maps the moisture and cracks, finds the root cause and gives your committee a written BOQ before any work starts.